Products and Cycles

PALINI MARINE RANGE

STEP   PRODUCTS REASON FOR USE MIXTURES DRYING TIMES  
A   WASH FOR SUPPORTS        
    Washing thinners        
  1 '950. … Products for cleaning and removing
residue mould oil.
Also to be used for the various phases of the preparation for painting.
ready to use Drying and blowing with purified compressed air is essential  
  2 100D1998 Plastic ABS-Nylon support wash ready to use
  3 '075.0031
B   BINDING / ANTICORROSION PROTECTION        
    Epoxy primers        
  1 881.7777 Grey Recommended for structures made of carbon fibre, aluminium, steel (not stainless) Catalyze 20% weight with 897.2000
Dilute 20% weight with 077. ….
For wet on wet cycles only for solvent based products.
Flash period from a min. of 40 minutes to a max. of 6 hours at a room temperature of 20°C. Ready for sanding after 24 hours at a room temperature of 20°C.
 
  2 881.1111 White
  3 881.9005 Black
  4 880.4444 Ochre Recommended especially for protecting steel (not stainless) structures Catalyze 20% weight with 897.2000
Dilute 20% weight with 077. ….
For wet on wet cycles only for solvent based products.
Flash period from a min. of 40 minutes to a max. of 6 hours at a room temperature of 20°C. Ready for sanding after 24 hours at a room temperature of 20°C.
 
C   LEVELLING/FILLING        
    Acrylic primers        
  1 873.1151 White Filling primers with excellent sanding properties for preparing supports for finishing 873 Catalyze 13% weight with 993.MS..
Dilute 0-7% weight with 075.0030
Sanding can be carried out according to the thicknesses applied after 4 hours at a room temperature of 20°C or after 24 hours at a room temperature of 20°C.  
  2 873.2251 Black
  3 873.2K51 Light grey
  4 873.ST51 Mid grey
D   UNDERCOAT / WET ON WET        
    Polyurethane primers        
  1 873A0002 Primers with undercoat properties to be applied on pre-levelled surfaces-previously sanded epoxy and/or acrylic primers for wet on wet finishes only with solvent based products.

Catalyze 30% weight with 916. ….
Dilute 30-40% weight with 075.0030

For wet on wet finishes with solvent based products
Ready for overcoating in a minimum of 20 minutes to a maximum of 2 hours after application at a room temperature of 20°C.
 
  2 873AC001
E   WET ON WET SEALERS        
    Acrylic Sealer        
  1 873.2002 Transparent wet on wet acrylic primer only for solvent based products that can be painted, for application on sanded primers Catalyze 40% weight with 993.MS..
Dilute 35-40% weight with 075.0030
Ready for overcoating after a minimum of 20
minutes to a maximum of 2 hours at a room temperature of 20°C.
 
F   TWO COAT FINISH For exteriors      
  1 Series 925 solvent Metallic and/or matt pearly tinter Catalyze 10% weight with 993.MS.. Ready for overcoating with transparent and/or matt finishes from a minimum of 30 minutes to a maximum of 2 hours at a room temperature of 20°C.  
  2 Series 926 solvent Matt solid tinter Dilute 80% weight 075.0030
      For interiors      
  3 Series 125 hydro Metallic and/or matt pearly tinter Dilute from 20 to 50% weight with 100E0224 Overcoating with transparent and/or matt finishes is possible after a flash period with forced air from a minimum of 10 minutes to a maximum of 1 hour at a room temperature of 20°C  
  4 Series 127 hydro Matt solid tinter Dilute from 20 to 40% weight with 100E0224
G   CLEAR FINISHES GLOSS AND MATT For exteriors      
  1 923.HS90 Gloss clear ideal for outdoors and indoors Catalyze 50% weight with 993.HH80
Dilute 30-35% weight with 075.0030
Ready for handling after 24 hours at a room temperature of 20°C. Ready for polishing after drying for 4 days at a room temperature of 20°C.  
      For interiors      
  2 923.MAT3 Matt clear Catalyze 30% weight 993.MS..
Dilute 30% weight with 075.0030
Ready for handling after 24 hours at a room temperature of 20°C. Completely dry after 7 days at a room temperature of 20°C  
  3 223.0420 Gloss clear for application on tinters series 125-127 hydro Catalyze 50% weight 293.0420
Dilute 5% weight 075.0030
H   GLOSS TOPCOATS For exteriors and interiors      
  1 Series 907 solvent Acrylic topcoat Catalyze 50% weight with 993.MS..
Dilute 25% weight with 075.0030
Ready for handling after 24 hours at a room temperature of 20°C.
Completely dry after 7 days at a room temperature of 20°C
 
  2 Series 910 solvent Acrylic topcoat Catalyze 50% weight with 993.MS..
Dilute 5-10% weight with 075.0030
  3 Series 822 solvent Polyurethane acrylic topcoat Catalyze 30% weight 992.0420
Dilute 0-5% weight 075.0030

Palinal Yachting