Our converters for:
607.0822
2K ACRIL-PUR ULTRA VOC < 420 g/l ENAMEL FOR LARGE SURFACES
High solid acrylic-polyurethane enamel with low environmental impact, in compliance with 2004/42/EC European Directive The exceptional wettability, slow dry dust free and excellent spreading make this enamel the ideal solution for painting large surfaces such as buses, trucks, railway wagons, etc..
607.0803
2K EXTRA POLYURETHANE ENAMEL
Polyurethane enamel with excellent resistance to light, chemical and atmospheric agents. Suitable for painting industrial vehicles, agricultural machinery and any other product subjected to the stress of washing with brushes. The painted product can be polished after only 24 hours of air drying.
607.0815
2K HIGH SOLID GLOSS POLYURETHANE ENAMEL
High solid polyurethane enamel for a gloss finish highly resistant to atmospheric agents Used for painting industrial vehicles, buses, trucks, tank trucks, tankers, agricultural machinery for building sector, vans, as well as in the building sector for painting windows and doors, metal shutters and much more.
607.0814
2K MEDIUM SOLID GLOSS POLYURETHANE ENAMEL
Medium solid polyurethane enamel for a gloss finish highly resistant to atmospheric agents and petrol. Ideal for painting industrial vehicles, agricultural machinery, original trailers and semi-trailers, truck cabins, tank trucks, billboards, etc ...
607.0812
2K GLOSS INDUSTRIAL POLYURETHANE ENAMEL
Gloss polyurethane enamel with excellent resistance to atmospheric agents. Ideal for industrial painting of shelving, truck bodies, chassis, tippers, etc..
607.0816
2K MATT POLYURETHANE ENAMEL
Matt polyurethane enamel with high anti-scratch properties. Used for painting wooden and metal furniture, advertising signs or other outdoor items. Also used as a special matt finish for car, bus and industrial vehicle interiors in general.
607.0817
2K MATT INDUSTRIAL POLYURETHANE ENAMEL
Matt or semi-gloss polyurethane enamel for industrial products exposed to atmospheric agents, machine tools, wood and metal furniture, etc...
607.0772
2K POLYURETHANE TEXTURED ENAMEL
Matt and semi-gloss polyurethane enamel with textured and anti-slip effect to be used in industrial body shop and industry. Suitable for painting sheet metal products where high scratch resistance is required (such as office furniture, computer coatings, kitchen hoods, etc. ...). and a good filling power to hide any small substrate imperfections
607.0819
2K KNURLED POLYURETHANE ENAMEL
Matt and semi-gloss polyurethane enamel with knurled effect. Suitable for painting sheet metal products where high scratch resistance is required such as office furniture, computer coatings, kitchen hoods etc..
607.0831
2K PUR MICACEOUS IRON ENAMEL WITH DIRECT ADHESION AND COARSE GRAIN
Coarse-grain iron micaceous enamel with good anti-corrosive and decorative power. Used in the building industry for painting gates, railings, metal carpentry, tanks, gates, etc... Excellent adhesion, good anti-corrosive, hardness and scratch resistance properties. Direct application on brushed and washed iron, steel and galvanized sheet metal.
607.0833
2K FINE GRAIN DIRECT ADHESION MICACEOUS IRON ENAMEL
Fine-grain iron micaceous enamel with good anti-corrosive and decorative power. Used in the building industry for painting gates, railings, metal carpentry, tanks, gates, etc... Excellent adhesion, good anti-corrosive, hardness and scratch resistance properties. Direct application on brushed and washed iron, steel and galvanized sheet metal.
607.0765
2K HIG FILLER PUR FULLER
two-pack polyurethane filler with high solidity and high filling power. Used in industrial body shop and industry where a filling or insulating filler is required for a traditional dry-on-dry cycle. It can be applied on polyester putties with spatula, anti-corrosive wash primers, epoxy primers, old thermosetting paints, fiberglass, cataphoresis after sanding.
607.0766
2K WET-ON-WET ACRYLIC FILLER
Acryl-polyurethane filler with under-enamel properties Used in industrial body shop and industry in general for treating large surfaces. It can be applied on polyester putties with spatula, anti-corrosive wash primers, epoxy primers, old thermosetting paints, fiberglass, cataphoresis after sanding.
